D-Link DGS-1510-20 User Manual - Page 376

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide 12. Green Power Saving EEE Power Saving This window is used to configure the power saving settings of the Switch. To view the following window, click Green > Power Saving, as shown below: Figure 12-1 Power Saving window The fields that can be configured are described below: Parameter Description Link Detection Power Saving Select this option to enable or disable the link detection state. When enabled, a port which has a link down status will be turned off to save power to the Switch. This will not affect the port's capabilities when the port status is link up. Scheduled Port-shutdown Power Saving Select this option to enable or disable applying the power saving by scheduled port shutdown. Scheduled Hibernation Power Saving Select this option to enable or disable the scheduled hibernation power saving feature. When this option is enabled, the system will enter into the hibernation mode based on the specified time range profile associated with it. When the system enters the hibernation mode, the switch will go into a low power state and idle. It will shut down all the ports and LEDs, all network function will be disabled, and only the console connection will work via the console port. If the Switch is an endpoint type Power Sourcing Equipment (PSE), the Switch will not provide power to the port. Scheduled Dim-LED Power Saving Select this option to enable or disable applying the power saving by scheduled dimming LEDs. Administrative Dim-LED Select this option to enable or disable the port LED function. Type Select the type of power saving. Options to choose from are Dim-LED and Hibernation. Time Range Enter the name of the time range to associate with the power saving type. 368