D-Link DGS-1510-20 User Manual - Page 336

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 9-68 JWAC Global Settings window The fields that can be configured for JWAC Global Settings are described below: Parameter JWAC State Description Select to enable or disable the JWAC feature's global state here. Click the Apply button to accept the changes made. The fields that can be configured for JWAC Settings are described below: Parameter UDP Filtering Authentication Method Virtual IP IPv4 Address IPv6 Address Description Select to enable or disable UDP filtering here. Select the authentication method used here. Options to choose from are MD5, CHAP, PAP, MS-CHAP, and MS-CHAP-v2. Select the virtual IP option used here. Options to choose from are IPv4, IPv6, and URL. After selecting IPv4 as the Virtual IP, the following field will be available. Enter the virtual IPv4 address used here. All JWAC authentication processes communicate with this IP address, however, the virtual IP does not respond to any ICMP packets or ARP requests. So it's not allowed to configure virtual IP in the same subnet as the switch's IP interface or the same subnet as the host PCs' subnet, otherwise JWAC authentication cannot operate correctly. The defined URL only takes effect when the virtual IP address is configured. The users get the FQDN URL stored on the DNS server to get the virtual IP address. The obtained IP address must match the virtual IP address configured by the command. If the IPv4 virtual IP is not configured, the IPv4 access cannot start JWAC authentication. After selecting IPv6 as the Virtual IP, the following field will be available. Enter the virtual IPv6 address used here. If the IPv6 virtual IP is not configured, the IPv6 access cannot start a JWAC authentication. 328