D-Link DGS-1510-20 User Manual - Page 75
Physical Stacking, Stacking Mode, Stack Preempt, Trap State, Apply, Stack ID, Current Unit ID
View all D-Link DGS-1510-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide NOTE: If there is a Box ID conflict when the stack is in the discovery phase, the device will enter a special standalone topology mode. Users can only get device information, configure Box IDs, save and reboot. All stacking ports will be disabled and an error message will be produced on the local console port of each device in the stack. Users must reconfigure Box IDs and reboot the stack. Figure 4-47 Physical Stacking window The fields that can be configured for Physical Stacking are described below: Parameter Stacking Mode Stack Preempt Trap State Description Select this option to enable or disable the stacking mode. Select this option to enable or disable preemption of the master role to come into play when a unit with a better priority is added to the Switch later. Select this option to enable or disable sending of stacking related traps. Click the Apply button to accept the changes made. The fields that can be configured for Stack ID are described below: Parameter Current Unit ID New Box ID Priority Description Select the unit ID of the switch in the stack. Select the new box ID for the switch that is selected in the Current Unit ID. The user may choose any number between 1 and 6 to identify the switch in the switch stack. Auto will automatically assign a box number to the switch in the switch stack. Enter the priority of the switch stacking unit. The range is from 1 to 63. Click the Apply button to accept the changes made. 67