D-Link DGS-1510-20 User Manual - Page 366
DDM Status Table, Action, Delete, Low Alarm, Low Warning, High Alarm, High Warning, Power Unit, Value
View all D-Link DGS-1510-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Unit Port Action Type Power Unit Value Description Select the switch unit that will be used for this configuration here. Select the port used for the configuration here. Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of RX power threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Select the power unit here. Options to choose from are mW and dBm. Enter the threshold value. When selecting mW in the Power Unit drop-down list, this value must be between 0 and 6.5535. When selecting dBm in the Power Unit drop-down list, this value must be between -40 and 8.1647. Click the Apply button to accept the changes made. DDM Status Table This window is used to display the current operating digital diagnostic monitoring parameters and their values on the SFP module for specified ports. To view the following window, click OAM > DDM > DDM Status Table, as show below: Figure 10-8 DDM Status Table window 358