D-Link DGS-1510-20 User Manual - Page 151

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide To view the following window, click L3 Features > IPv4 Static/Default Route, as shown below: Figure 6-9 IPv4 Static/Default Route window The fields that can be configured are described below: Parameter IP Address Mask Gateway Backup State Description Enter the IPv4 address for this route here. Tick the Default Route check box to use the default route as the IPv4 address. Enter the IPv4 network mask for this route here. Enter the gateway address for this route here. Select the backup state option here. Options to choose from are Primary, and Backup. When the Primary option is selected, the route will be used as the primary route to the destination. When the Backup option is selected, the route will be used as the backup route to the destination. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IPv4 Route Table This window is used to view and configure the IPv4 route table settings. To view the following window, click L3 Features > IPv4 Route Table, as shown below: Figure 6-10 IPv4 Route Table window 143