D-Link DGS-1510-20 User Manual - Page 364
DDM Bias Current Threshold Settings, OAM > DDM > DDM Bias Current Threshold Settings
View all D-Link DGS-1510-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 364 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Port Action Type Value Select the port used for the configuration here. Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of voltage threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Enter the threshold value. This value must be between 0 and 6.55 Volt. Click the Apply button to accept the changes made. DDM Bias Current Threshold Settings This window is used to configure the threshold of the bias current for specific ports on the Switch. To view the following window, click OAM > DDM > DDM Bias Current Threshold Settings, as show below: Figure 10-5 DDM Bias Current Threshold Settings window The fields that can be configured are described below: Parameter Unit Port Action Type Value Description Select the switch unit that will be used for this configuration here. Select the port used for the configuration here. Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of bias current threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Enter the threshold value. This value must be between 0 and 131 mA. Click the Apply button to accept the changes made. DDM TX Power Threshold Settings This window is used to configure the threshold of TX power for specific ports on the Switch. To view the following window, click OAM > DDM > DDM TX Power Threshold Settings, as show below: 356