D-Link DGS-3620-52P CLI Guide - Page 1010
show subnet_vlan
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1010 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin#delete subnet_vlan network 172.168.1.1/24 Command: delete subnet_vlan network 172.168.1.1/24 Success. DGS-3620-28SC:admin# To delete all subnet VLAN entries: DGS-3620-28SC:admin#delete subnet_vlan all Command: delete subnet_vlan all Success. DGS-3620-28SC:admin# 96-3 show subnet_vlan Description This command is used to display a subnet VLAN. Format show subnet_vlan {[network | ipv6network | vlan | vlanid ]} Parameters network - (Optional) Specify an IPv4 network address. - Specify an IPv4 network address. The format is ipaddress/prefix length. ipv6network - (Optional) Specify an IPv6 network address. - Specify an IPv6 network address. The format is ipaddress/prefix length. vlan - (Optional) Specify to display all subnet VLAN entries associated with this VLAN. - Specify a VLAN name. The maximum length is 32 characters. vlanid - (Optional) Specify a list of VLANs by VLAN ID. - Specify the VLAN ID. Note: If no parameter is specified, all subnet VLAN information will be displayed. Restrictions None. Example To display a specified subnet VLAN entry: DGS-3620-28SC:admin#show subnet_vlan network 172.168.1.1/24 Command: show subnet_vlan network 172.168.1.1/24 1005