D-Link DGS-3620-52P CLI Guide - Page 812
create pim crp group, delete pim crp group
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 812 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# 73-9 create pim crp group Description This command is used to add a multicast group range into a C-RP serve list for PIM-SM. Format create pim crp group rp Parameters group - Specifies the multicast group address for this Switch to become a Candidate RP. This address must be a class D address. - Enter the group network address used here. rp - Specifies that the interface will act as C-RP for the group. - Enter the IP interface name used here. This name can be up to 12 characters long. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To add a multicast group range into a C-RP server list: DGS-3620-28SC:admin# create pim crp group 224.1.2.3/32 rp System Command: create pim crp group 224.1.2.3/32 rp System Success. DGS-3620-28SC:admin# 73-10 delete pim crp group Description This command is used to delete a multicast group range from the C-RP server list. Format delete pim crp group Parameters group - Specifies the multicast group address for this switch to be removed from being a Candidate RP. This address must be a class D address. - Enter the multicast group network address used here. 807