D-Link DGS-3620-52P CLI Guide - Page 696
config mld_snooping multicast_vlan_group
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 696 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions None. Example To display all MLD snooping multicast VLAN profiles: DGS-3620-28SC:admin#show mld_snooping multicast_vlan_group_profile Command: show mld_snooping multicast_vlan_group_profile Profile Name rock Total Entries : 1 Multicast Addresses FF1E::1 FF1E::10-FF1E::20 DGS-3620-28SC:admin# 62-7 config mld_snooping multicast_vlan_group Description This command is used to configure the multicast group which will be learned with the specific multicast VLAN. There are two cases that need to be considered. For the first case, suppose that a multicast group is not configured and multicast VLANs do not have overlapped member ports. That means the join packets received by the member port will only be learned with the multicast VLAN that this port belongs to. If not, which is the second case, the join packet will be learned with the multicast VLAN that contains the destination multicast group. If the destination multicast group of the join packet can not be classified into any multicast VLAN that this port belongs to, then the join packet will be learned with the natural VLAN of the packet. Please note that the same profile can not overlap different multicast VLANs. Multiple profiles can be added to a multicast VLAN, however. Format config mld_snooping multicast_vlan_group [add | delete] profile_name Parameters - Specify the name of the multicast VLAN to be configured. Each multicast VLAN is given a name that can be up to 32 characters. add - Specify to associate a profile to a multicast VLAN. delete - Specify to de-associate a profile from a multicast VLAN. profile_name - Specify the multicast VLAN profile name. The maximum length is 32 characters. - Specify the multicast VLAN profile name. The profile name can be up to 32 characters long. Restrictions Only Administrator, Operator and Power-User level users can issue this command. 691