D-Link DGS-3620-52P CLI Guide - Page 682
config mld_snooping querier
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 682 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters None. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To clear the MLD snooping statistics counters: DGS-3620-28SC:admin#clear mld_snooping statistics counter Command: clear mld_snooping statistics counter Success. DGS-3620-28SC:admin# 61-10 config mld_snooping querier Description This command is used to configure the time, in seconds, between general query transmissions, the maximum time to wait for reports from listeners, and the permitted packet loss that guarantees MLD snooping. Format config mld_snooping querier [vlan_name | vlanid | all] {query_interval | max_response_time | robustness_variable | last_listener_query_interval | state [enable | disable] | version } (1) Parameters vlan_name - Specify the name of the VLAN for which MLD snooping querier is to be configured. - Specify the VLAN name. The maximum length is 32 characters. vlanid - Specify the ID of the VLAN for which MLD snooping querier is to be configured. - Specify the VLAN ID list. all - Specify all VLANs for which MLD snooping querier is to be configured. query_interval - Specify the amount of time in seconds between general query transmissions. - Specify the amount of time in seconds between general query transmissions. The default setting is 125 seconds. max_response_time - Specify the maximum time in seconds to wait for reports from members. - Specify the maximum time in seconds to wait for reports from members. The default setting is 10 seconds. robustness_variable - Provides fine-tuning to allow for expected packet loss on a subnet. The value of the robustness variable is used in calculating the following MLD message intervals: 1. Group member interval-Amount of time that must pass before a multicast router decides there are no more members of a group on a network. This interval is calculated as follows: (robustness variable x query interval) + (1 x query response interval). 2. Other querier present interval-Amount of time that must pass before a multicast router 677