D-Link DGS-3620-52P CLI Guide - Page 874
config ptp p2p_transparent ports, show ptp
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 874 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 79-9 config ptp p2p_transparent ports Description This command is used to configure the pdelay_request message attribute for the message interval of the P2P transparent clock. Format config ptp p2p_transparent ports [ | all] pdelay_req_interval Parameters ports - Specifies the list of port used for this configuration. - Enter the list of port used for this configuration here. all - Specifies that all the ports will be used for this configuration. pdelay_req_interval - Specifies the permitted mean time interval between successive messages. - Enter the permitted mean time interval value used here. This value must be between 1 and 32. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the pdelay_req_interval attribute of all the PTP ports to 4 seconds: DGS-3620-28SC:admin# config ptp p2p_transparent ports all pdelay_req_interval 4 Command: config ptp p2p_transparent ports all pdelay_req_interval 4 Success. DGS-3620-28SC:admin# 79-10 show ptp Description This command is used to display the configured attributes of PTP on the switch. Format show ptp Parameters None. Restrictions None. 869