D-Link DGS-3620-52P CLI Guide - Page 485
show router_ports
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 485 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# 39-18 show router_ports Description This command is used to display the current router ports on the switch. Format show router_ports [vlan | vlanid | all] {[static | dynamic | forbidden]} Parameters vlan - Specify the name of the VLAN on which the router port resides. - Specify the VLAN name. The maximum length is 32 characters. vlanid - Specify the ID of the VLAN on which the router port resides. - Specify the VLAN ID list. all - Specifies that all the VLAN's will be displayed. static - (Optional) Display router ports that have been statically configured. dynamic - (Optional) Display router ports that have been dynamically registered. forbidden - (Optional) Display forbidden router ports that have been statically configured. Note: If no parameter is specified, the system will display all the current router ports on the Switch. Restrictions None. Example To display the router ports on the default VLAN: DGS-3620-28SC:admin#show router_ports vlan default Command: show router_ports vlan default VLAN Name Static Router Port Dynamic Router Port Router IP Forbidden Router Port : default : : : : Total Entries: 1 DGS-3620-28SC:admin# 480