D-Link DGS-3620-52P CLI Guide - Page 1168
Vendor-Specific Attribute, Description, Value, Usage, RADIUS, Server, RADIUS Tunnel Attribute, Tag
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1168 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Vendor-Specific Attribute Description Vendor-ID Defines the vendor. Vendor-Type Defines the attribute. Attribute-Specific Field Used to assign the 802.1p default priority of the port. Value 171 (DLINK) 4 0-7 Usage Required Required Required If the user has configured the 802.1p priority attribute of the RADIUS server (for example, priority 7) and the 802.1X, or MAC based authentication is successful, the device will assign the 802.1p default priority (according to the RADIUS server) to the port. However, if the user does not configure the priority attribute and authenticates successfully, the device will not assign a priority to this port. If the priority attribute is configured on the RADIUS server is a value out of range (>7), it will not be set to the device. To assign VLAN by RADIUS Server, the proper parameters should be configured on the RADIUS Server. To use VLAN assignment, RFC3580 defines the following tunnel attributes in RADIUS packets. The table below shows the parameters for a VLAN: RADIUS Tunnel Attribute Description Value Tunnel-Type This attribute indicates the 13 (VLAN) tunneling protocol(s) to be used (in the case of a tunnel initiator) or the tunneling protocol in use (in the case of a tunnel terminatior). Tunnel-Medium-Type This attribute indicates the transport medium being used. 6 (802) Tunnel-Private-Group-ID This attribute indicates group A string (VID) ID for a particular tunneled session. Usage Required Required Required A summary of the Tunnel-Private-Group-ID Attribute format is shown below. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 | Type | Length | Tag | String... The table below shows the definition of Tag field (different with RFC 2868): Tag field value String field format 1163 Note