D-Link DGS-3620-52P CLI Guide - Page 839
config pim6 register_probe_time, config pim6 register_suppression_time
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 839 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To specify the switch calculates the register packet checksum including data portion: DGS-3620-28SC:admin# config pim6 register_checksum_calculate include_data Command: config pim6 register_checksum_calculate include_data Success. DGS-3620-28SC:admin# 74-20 config pim6 register_probe_time Description This command is used to configure the PIM6-SM register probe time. Format config pim6 register_probe_time Parameters register_probe_time - Specifies the time before the Register-Stop Timer (RST) expires when a DR may send a Null-Register to the RP to cause it to resend a Register-Stop message. - Enter the register probe time value here. This value must be between 1 and 127 seconds. The default value is 5 seconds. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To configure the register probe time to be 20 seconds: DGS-3620-28SC:admin# config pim6 register_probe_time 20 Command: config pim6 register_probe_time 20 Success. DGS-3620-28SC:admin# 74-21 config pim6 register_suppression_time Description This command is used to configure the PIM6-SM register suppression time. This is the period during which a PIM Designated Router (DR) stops sending Register-encapsulated data to the Rendezvous Point (RP) after receiving a Register-Stop message. 834