D-Link DGS-3620-52P CLI Guide - Page 1016
delete super_vlan, config sub_vlan
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1016 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 97-3 delete super_vlan Description This command is used to delete a super VLAN. Format delete super_vlan [ | vlanid ] Parameters - Enter the VLAN name used here. This name can be up to 32 characters long. vlanid - Specifies the VLAN ID used. - Enter the VLAN ID used here. This value must be between 1 and 4094. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To delete the super VLAN by specify the VLAN ID 10: DGS-3620-28SC:admin# delete super_vlan vlanid 10 Command: delete super_vlan vlanid 10 Success. DGS-3620-28SC:admin# 97-4 config sub_vlan Description This command is used to configure the IP range of the sub-VLAN. A sub-VLAN can has one or more IP ranges. Configuring IP range of sub-VLAN can reduce the ARP traffic in the super VLAN. That is multiple IP (ranges) is allowed to map to one sub-VLAN. One IP can not map to multiple sub-VLANs, if one IP is mapped to multiple VLAN it may cause traffic forwarding to the wrong VLAN. Format config sub_vlan [ | vlanid ] [add | delete] ip_range to Parameters - Enter the VLAN name used here. This name can be up to 32 characters long. vlanid - Specifies the VLAN ID used. - Enter the VLAN ID used here. This value must be between 1 and 4094. add - Specifies the IP range of the sub-VLAN that will be added. delete - Specifies the IP range of the sub-VLAN that will be deleted. 1011