D-Link DGS-3620-52P CLI Guide - Page 1062
disable vrrp, create vrrp vrid
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1062 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 104-2 disable vrrp Description This command is used to disable VRRP globally. Format disable vrrp {ping} Parameters ping - (Optional) Specifies that the ping option will be disabled. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To disable VRRP: DGS-3620-28SC:admin# disable vrrp Command: disable vrrp Success. DGS-3620-28SC:admin# 104-3 create vrrp vrid Description This command is used to create a virtual router entry by VRID. Format create vrrp vrid ipif ipaddress {state [enable | disable] | priority | advertisement_interval | preempt [true | false] | critical_ip | critical_ip_state [enable | disable]} Parameters vrid - Specifies the ID of the Virtual Router used. - Enter the Virtual Router ID used here. This value must be between 1 and 255. ipif - Specifies the IP interface used for this configuration. - Enter the IP interface name used here. This name can be up to 12 characters long. ipaddress - Specifies the virtual router's IP address used. - Enter the virtual router's IP address used here. state - (Optional) Specifies the state of the virtual router function. enable - Specifies that the virtual router function will be enabled. disable - Specifies that the virtual router function will be disabled. 1057