D-Link DGS-3620-52P CLI Guide - Page 489
config igmp_snooping multicast_vlan_group_profile
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 489 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To create an IGMP snooping multicast group profile with the name "Knicks": DGS-3620-28SC:admin#create igmp_snooping multicast_vlan_group_profile Knicks Command: create igmp_snooping multicast_vlan_group_profile Knicks Success. DGS-3620-28SC:admin# 40-4 config igmp_snooping multicast_vlan_group_profile Description This command is used to configure an IGMP snooping multicast group profile on the switch and to add or delete multicast addresses for a profile. Format config igmp_snooping multicast_vlan_group_profile [add | delete] Parameters - Specify the multicast VLAN profile name. The maximum length is 32 characters. add - Specify to add a multicast address list to this multicast VLAN profile. delete - Specify to delete a multicast address list from this multicast VLAN profile. - Specify a multicast address list. This can be a continuous single multicast address, such as 225.1.1.1, 225.1.1.3, 225.1.1.8, a multicast address range, such as 225.1.1.1-225.2.2.2, or both types, such as 225.1.1.1, 225.1.1.18-225.1.1.20. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To add the single multicast address 225.1.1.1 and multicast range 225.1.1.10-225.1.1.20 to the IGMP snooping multicast VLAN profile named "Knicks": DGS-3620-28SC:admin#config igmp_snooping multicast_vlan_group_profile Knicks add 225.1.1.1, 225.1.1.10-225.1.1.20 Command: config igmp_snooping multicast_vlan_group_profile Knicks add 225.1.1.1, 225.1.1.10-225.1.1.20 Success. DGS-3620-28SC:admin# 484