D-Link DGS-3620-52P CLI Guide - Page 583
config jumbo_frame ports
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 583 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters None. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To disable Jumbo Frames: DGS-3620-28SC:admin#disable jumbo_frame Command: disable jumbo_frame Success. DGS-3620-28SC:admin# 48-3 config jumbo_frame ports Description This command is used to configure the jumbo frame state on specified ports. Format config jumbo_frame ports [ | all] state [enable | disable] Parameters - Enter the list of ports used for this configuration here. all - Specifies that all the ports will be used for this configuration. state - Specifies the jumbo frame state to be applied to a range of ports specified. enable - Specifies that the jumbo frame state will be enabled. disable - Specifies that the jumbo frame state will be disabled. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To enable jumbo frames on ports 1:1-1:5: DGS-3620-28SC:admin# config jumbo_frame ports 1:1-1:5 state enable Command: config jumbo_frame ports 1:1-1:5 state enable Success. DGS-3620-28SC:admin# 578