D-Link DGS-3620-52P CLI Guide - Page 1040
download cfg_fromRCP
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1040 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To download runtime firmware from a TFTP server: DGS-3620-28SC:admin#download firmware_fromTFTP 10.0.0.66 src_file dgs-3620.had dest_file runtime.had Command: download firmware_fromTFTP 10.0.0.66 src_file dgs-3620.had dest_file runtime.had Connecting to server Done. Download firmware Done. Please wait, programming flash......... Done. Do not power off! DGS-3620-28SC:admin# 103-2 download cfg_fromRCP Description This command is used to download a configuration file from a Remote Copy Protocol (RCP) server. Format download cfg_fromRCP [{username } {} src_file | rcp: ] {[unit | all]} {dest_file } Parameters username - (Optional) Specify the remote user name on the RCP server. - Specify the remote user name on the RCP server. - (Optional) Specify the IP address of the RCP server. src_file - Specify the path and file name of the switch configuration file on the RCP server. The maximum length is 64. - Specify the path and file name of the switch configuration file on the RCP server. The maximum length is 64. rcp: - Syntax: rcp: username@ipaddr/directory/filename. Example for full path: [email protected]/home/user_name/desxxxx.had; Example for relative path: [email protected]./desxxxx.had. Note: No spaces in the whole . - Syntax: rcp: username@ipaddr/directory/filename. Example for full path: [email protected]/home/user_name/desxxxx.had; Example for relative path: [email protected]./desxxxx.had. Example for omitted user name in RCP string: 10.1.1.1./desxxxx.had. Note: No spaces in the whole . unit - Specifies which unit on the stacking system. If it is not specified, it refers to the master unit. - Enter the unit ID used here. This value must be between 1 and 12. all - Specifies that all the units in the stacking system will be used. dest_file - (Optional) Specify the path and file name of the destination file on the device. - Specify the path and file name of the destination file. Restrictions Only Administrator-level users can issue this command. 1035