D-Link DGS-3620-52P CLI Guide - Page 218
create cfm md, config cfm md
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide ] mepid {period [1sec | 1min] | level | state [enable | disable]} config cfm lock md [ | md_index ] ma [ | ma_index ] mepid {period [1sec | 1min] | level | state [enable | disable]} 15-1 create cfm md Description This command is used to create a CFM maintenance domain. Format create cfm md {md_index } level Parameters - Enter the maintenance domain name used here. This name can be up to 22 characters long. md_index - Specifies the maintenance domain index used. - Enter the maintenace domain index value used here. This value must be between 1 and 4294967295. level - Specify the maintenance domain level. - Specify the maintenance domain level from 0 to 7. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To create a CFM maintenance domain called "op_domain" and assign a maintenance domain level of "2": DGS-3620-28SC:admin#create cfm md op_domain level 2 Command: create cfm md op_domain level 2 Success. DGS-3620-28SC:admin# 15-2 config cfm md Description This command is used to configure the parameters of a maintenance domain. The creation of MIPs on an MA is useful to trace the link, MIP by MIP. It also allows the user to perform a loopback from an MEP to an MIP. 213