D-Link DGS-3620-52P CLI Guide - Page 619
config lldp_med ports
![]() |
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 619 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide all - Specify to set all ports in the system. state - Enable or disable the SNMP trap notification of topology change detected state. enable - Enable the SNMP trap notification of topology change detected. disable - Disable the SNMP trap notification of topology change detected. The default notification state is disabled. Restrictions Only Administrator and Operator-level users can issue this command. Example To enable topology change notification on ports 1 to 2: DGS-3620-28SC:admin#config lldp_med notification topo_change ports 1-2 state enable Command: config lldp_med notification topo_change ports 1-2 state enable Success. DGS-3620-28SC:admin# 53-12 config lldp_med ports Description This command is used to enable or disable transmitting LLDP-MED TLVs. It effectively disables LLDP-MED on a per-port basis by disabling transmission of TLV capabilities. In this case, the remote table's objects in the LLDP-MED MIB corresponding to the respective port will not be populated. Format config lldp_med ports [ | all] med_transmit_capabilities [all | {capabilities | network_policy | power_pse | inventory}(1)] state [enable | disable] Parameters - Specify a range of ports to be configured. all - Specify to set all ports in the system. med_transit_capabilities - Select to send the LLDP-MED TLV capabilities specified. all - Select to send capabilities, network policy, and inventory. capabilities - (Optional) Specify that the LLDP agent should transmit "LLDP-MED capabilities TLV." If a user wants to transmit LLDP-MED PDU, this TLV type should be enabled. Otherwise, this port cannot transmit LLDP-MED PDU. network_policy - (Optional) Specify that the LLDP agent should transmit "LLDP-MED network policy TLV." power_pse - This TLV type indicates that LLDP agent should transmit 'LLDP-MED extended Power via MDI TLV' if local device is PSE device. inventory - (Optional) Specify that the LLDP agent should transmit "LLDP-MED inventory TLV." state - Enable or disable the transmitting of LLDP-MED TLVs. enable - Enable the transmitting of LLDP-MED TLVs. disable - Disable the transmitting of LLDP-MED TLVs. 614
![](/manual_guide/products/dlink-dgs362052p-cli-guide-2af3cc0/619.png)