D-Link DGS-3620-52P CLI Guide - Page 50
config radius add
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions None. Example To display guest VLAN information: DGS-3620-28SC:admin#show 802.1x guest_vlan Command: show 802.1x guest_vlan Guest Vlan Setting Guest vlan : guest Enable guest vlan ports : 1-10 DGS-3620-28SC:admin# 3-20 config radius add Description This command is used to add a new RADIUS server. The server with a lower index has higher authenticative priority. Format config radius add [ | ] key [default | {auth_port | acct_port | timeout | retransmit }(1)] Parameters - Specify the RADIUS server index. - Specify the IP address of the RADIUS server. - Specifies the IPv6 address used. key - Specify the key pre-negotiated between switch and the RADIUS server. It is used to encrypt user's authentication data before being transmitted over the Internet. The maximum length of the key is 32. - The maximum length of the password is 32 characters long. default - Sets the auth_port to be 1812 and acct_port to be 1813. auth_port - Specify the UDP port number which is used to transmit RADIUS authentication data between the switch and the RADIUS server.The range is 1 to 65535. - The authentication port value must be between 1 and 65535. acct_port - Specify the UDP port number which is used to transmit RADIUS accounting statistics between the switch and the RADIUS server. The range is 1 to 65535. - The accounting statistics value must be between 1 and 65535. timeout - Specify the time, in seconds ,for waiting server reply. The default value is 5 seconds. - The timeout value must be between 1 and 255. retransmit - Specify the count for re-transmit. The default value is 2. - The re-transmit value must be between 1 and 20. 45