D-Link DGS-3620-52P CLI Guide - Page 1091
show private_vlan
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1091 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters - Specify the name of the private VLAN. The maximum length is 32 characters. vid - Specify the VLAN ID of the private VLAN. - Specify the VLAN ID between 1 and 4094. add - Specify to add isolated or community. isolated - Specify the secondary VLAN as an isolated VLAN. community - Specify the secondary VLAN as a community VLAN. remove - Specify to remove the specified private VLAN. - Specify the VLAN of a range of secondary VLANs to add to the private VLAN or remove from it. The maximum length is 32 characters. vlanid - Specify a range of the second VLAN IDs to add to the private VLAN or remove from it. - Specify the VLAN ID. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To associate secondary VLAN to private VLAN p1: DGS-3620-28SC:admin#config private_vlan p1 add community vlanid 2-5 Command: config private_vlan p1 add community vlanid 2-5 Success. DGS-3620-28SC:admin# 106-17 show private_vlan Description This command is used to display private VLAN information on the switch. Format show private_vlan {[ | vlanid ]} Parameters - (Optional) Specify the name of the private VLAN. The maximum length is 32 characters. vlanid - (Optional) Specify the VLAN ID of the private VLAN. - Specify the VLAN ID of the private VLAN. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To display private VLAN settings: 1086