D-Link DMS-1100 User Manual - Page 24
Tool Bar > Save Menu, Save Configuration, Tool Bar, Function Tree, Main Configuration Screen, Logout
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
D-Link DMS-1100 Series User Manual The above image is the Web-based Management screen. The three main areas are the Tool Bar on top, the Function Tree, and the Main Configuration Screen. The Tool Bar provides a quick and convenient way for essential utility functions like firmware and configuration management. By choosing different functions in the Function Tree, you can change all the settings in the Main Configuration Screen. The main configuration screen will show the current status of your Switch by clicking the model name on top of the function tree. At the upper right corner of the screen the username and current IP address will be displayed. Under the username is the Logout button. Click this to end this session. NOTE: If you close the web browser without clicking the Logout button first, then it will be seen as an abnormal exit and the login session will still be occupied. Click the D-Link logo at the upper-left corner of the screen to be redirected to the local D-Link website. Tool Bar > Save Menu The Save Menu provides Save Configuration and Save Log functions. Figure 4.5 - Save Menu Save Configuration The Save Configuration page allows user to save the configuration changes to the S witch's non-volatile RAM. Figure 4.6 - Save Configuration The fields that can be configured for Save Configuration are described below: Item Description Destination Select the destination to save the configuration to. Startup-config Check the box to enable the startup configuration function. Table 4.1 Click Apply to make the configurations take effect. 18