D-Link DMS-1100 User Manual - Page 35
System > Port Configuration > Port Status, System > Port Configuration > Error Disable Settings
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
D-Link DMS-1100 Series User Manual Description port 9 ~ port 10, the capability advertised can be selected with 1000M and 10G. Enter a 64 characters description for the corresponding port. Table 4.13 Click Apply to make the configurations take effect. Click the Refresh button to refresh the displayed table. System > Port Configuration > Port Status The Port Settings page allows user to view the Switch's physical port status and settings. The table will display the Port, Status, MAC Address, VLAN, Flow Control Operator, Duplex, and Speed. Figure 4.29 - System > Port Configuration > Port Status System > Port Configuration > Error Disable Settings The Error Disable Settings page allows user to configure the sending of SNMP notifications for error disable state. Figure 4.30 - System > Port Configuration > Error Disable Settings The fields that can be configured for Error Disable Settings are described below: Item Description Error Disable Trap Settings Asserted Select to enable or disable the notifications when entering into the error 29