D-Link DMS-1100 User Manual - Page 39
System > PoE > PoE Measurement (DMS-1100-10TP only)
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
D-Link DMS-1100 Series User Manual Time Range can be provisioned. The valid range for maximum wattage is between 1000 mW and 30000 mW. Specify the time range profile used in port(s). Table 4.17 Click Apply to make the configurations take effect. Note: For DMS-1100-10TP, the port 1 ~ port 8 are compliance with 802.3at. The total PoE budget is 240 Watts. System > PoE > PoE Measurement (DMS-1100-10TP only) The PoE measurement page displays the measurement information of PoE ports. Figure 4.35 -System > PoE > PoE Measurement System > PoE > PoE Alive Settings (DMS-1100-10TP only) PD Alive feature is mechanism to detect the PD host periodically, once the detection is determined failed then corresponding action would be executed. Figure 4.36 -System > PoE >PD Alive Settings The fields that can be configured for PD Alive Settings are described below: Item Description From Port / To Port Specify the port (port range) to be configured. PD Alive State Switching the PD Alive feature state for specified port (port range). PD IP Address Indicate the IP address of PD host. Poll Interval Specify the interval of polling for PD host. Default value is 30 seconds. The interval range is 10 ~ 300 seconds. 33