D-Link DMS-1100 User Manual - Page 62
L2 Features > VLAN > Auto Surveillance VLAN > MAC Settings and Surveillance Device, From Port/To Port
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
D-Link DMS-1100 Series User Manual Detected (OUI) IP-Camera Detected (ONVIF) NVR Detected (ONVIF) Port Settings From Port/To Port State Unit counts for IP-Camera (determined by ONVIF) Unit counts for NVR (determined by ONVIF) Specify the port range used for the configuration. Specify to enable or disable the state of the port. Table 4.42 Click Apply to make the configurations take effect. L2 Features > VLAN > Auto Surveillance VLAN > MAC Settings and Surveillance Device The MAC Settings and Surveillance Device page is used to configure the user-defined surveillance device OUI and display the surveillance VLAN information. Figure 4.68 - L2 Features > VLAN > Auto Surveillance VLAN > MAC Settings and Surveillance Device The fields that can be configured for MAC Settings and Surveillance Device are described below: Item Description Component Type Specify the surveillance component type. Option to choose from are Vms, VmsClient, VideoEncoder, NetworkStorage and Other. Description Enter the description for the user-defined OUI with a maximum of 32 characters. MAC Address Enter the description for the user-defined OUI with a maximum of 32 characters. Mask Enter the OUI MAC address matching bitmask. Table 4.43 Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. After click the Auto Surveillance VLAN Summary tab, the following page will appear. 56