D-Link DMS-1100 User Manual - Page 64
L2 Features > VLAN > Voice VLAN > Voice VLAN Port
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
D-Link DMS-1100 Series User Manual Voice VLAN State VLAN ID (1-4094) Voice VLAN CoS Aging Time Select to enable or disable Voice VLAN. Enter the voice VLAN ID. The value is range from 1 to 4094. Specify the priority of the voice VLAN from 0 to 7. Enter the aging time of surveillance VLAN. The range is from 1 to 65535 minutes. The default value is 720 minutes. The aging time is used to remove a port from voice VLAN if the port is an automatic VLAN member. When the last voice device stops sending traffic and the MAC address of this voice device is aged out, the voice VLAN aging timer will be started. The port will be removed from the voice VLAN after expiration of voice VLAN aging timer. If the voice traffic resumes during the aging time, the aging counter will be reset and the timer will stop. Table 4.44 Click the Apply button to accept the changes made. L2 Features > VLAN > Voice VLAN > Voice VLAN Port The Voice VLAN Port page is used to show the ports voice VLAN information. Figure 4.73 - L2 Features > VLAN > Voice VLAN > Voice VLAN Port The fields that can be configured for Voice VLAN Port are described below: Item Description From Port / To Port Select the appropriate port range used for the configuration. State Specify to enable or disable the state of the port. Mode Specify the mode of the port. Options to choose from are Auto Untagged, Auto Tagged, and Manual. Table 4.45 Click the Apply button to accept the changes made. 58