D-Link DMS-1100 User Manual - Page 44
System > Time Range, SNTP Global Settings
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
D-Link DMS-1100 Series User Manual Figure 4.41 - System > Time and SNTP > SNTP Settings The fields that can be configured for SNTP Settings are described below: Item Description SNTP Global Settings SNTP State Select to enable or disable the SNTP state. Poll Interval (30-99999) Enter the poll interval. The value is from 30 to 99999 seconds. The default interval is 720 seconds. SNTP Server Settings IPv4 Address Enter the IPv4 address of the SNTP server which provides the clock synchronization. Table 4.22 Click Apply to make the configurations take effect. System > Time Range The profiles of time range configurations. The time range profile can be used in PoE Configuration which may achieve the goal of saving energy in off-peak time. Figure 4.42 - System > Time Range The fields that can be configured for Time Range are described below: Item Description Range Name Specify the name for time range profile. From Week / To Week Specify the weekday range to be configured. From Time / To Time Specify the start time and end time Table 4.22 38