D-Link DMS-1100 User Manual - Page 54
L2 Features > FDB > Static FDB > Unicast Static FDB
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
D-Link DMS-1100 Series User Manual Figure 4.54 - Management > D-Link Discover Protocol Settings The fields that can be configured for D-Link Discover Protocol Settings are described below: Item Description DDP Global Settings D-Link State Discovery Protocol Select the enable or disable the D-Link Discovery Protocol state. Report Timer Specify the interval in seconds between two consecutive DDP report messages. Options to choose from are 30, 60, 90,120, and Never. DDP Port Settings From Port / To Port Enter the appropriate port range used for the configuration. State Select to enable or disable the DDP port state. Table 4.33 Click Apply to make the configurations take effect. L2 Features > FDB > Static FDB > Unicast Static FDB The Unicast Static FDB page allows user to view and configure the static unicast forwarding settings on the Switch. Figure 4.55 - L2 Features > FDB > Static FDB > Unicast Static FDB Port / Drop: Allows the selection of the port number on which the MAC address entered resides. This option could also drop the MAC address from the unicast static FDB. When selecting Port, select the switch unit 48