D-Link DMS-1100 User Manual - Page 76
L2 Features > Link Aggregation
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
D-Link DMS-1100 Series User Manual From Port / To Port From Port / To Port Enter a consecutive group of ports to be configured starting with the selected port. Use the drop-down menu to toggle between Enabled and Disabled. Default is disabled. Table 4.55 Click Apply to make the configurations take effect. L2 Features > Link Aggregation The Link Aggregation page allows user to view and configure the link aggregation settings. Figure 4.90 - L2 Features > Link Aggregation The fields that can be configured for Link Aggregation are described below: Item Description Ling Aggregation Settings System Priority (1-65535) Load Balance Algorithm Enter the system's priority value. This must be between 1 and 65535. By default, the value is 32768. The system priority determines which ports can join a port-channel and which ports are put in stand-alone mode. The lower value has a higher priority. If two or more ports have the same priority, the port number determines the priority. Specify the load balancing algorithm that will be used. Options to choose from are: Source MAC, Destination MAC, Source Destination MAC, Source IP, Destination IP, and Source Destination IP. By default, this option is Source MAC. System ID: The System ID information. Channel Group Information From Port / To Port Select the appropriate port range used for the configuration. Group ID: Enter the channel-group number. This value must be between 1 and 32. The system will automatically create the portchannel when a physical port first joins a channel-group. An interface can only join one channel-group. Mode Select either On, Active, or Passive. If you selected On, the channelgroup type is static. If Active or Passive is selected, the channel-group type is LACP. A channel-group can only consist of either static members or LACP members. Once the type of channel-group has 70