D-Link DMS-1100 User Manual - Page 88
L2 Features > LLDP > LLDP Management Address List, From Port/ To Port
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
D-Link DMS-1100 Series User Manual Figure 4.104 - L2 Features> LLDP > LLDP Port Settings The fields that can be configured for the LLDP Port Settings are described below: Item Description From Port/ To Port Select the range of ports to be configured. Subtype Select the subtype of LLDP Type Length Value (TLV). Options to choose from are MAC Address, and Local. Select the LLDP transmission mode on the port. The available options are: ◆ TX: Enables transmitting LLDP packets only. Admin Status ◆ RX: Enables receiving LLDP packets only. ◆ TX and RX: Enables transmitting and receiving LLDP packets. This is the default value. ◆ Disabled: Disables LLDP on the port. IP Subtype Select the type of the IP address information to be sent. Options to choose from are All, IPv4 and IPv6. Action Select to remove or add the action field. Address Enter the IP address to be sent. Table 4.73 Click Apply to make the configurations take effect. L2 Features > LLDP > LLDP Management Address List The LLDP Management Address List page displays the detailed management address information for the entry. Figure 4.105 - L2 Features > LLDP >LLDP Management Address List 82