D-Link DMS-1100 User Manual - Page 90
L2 Features > LLDP > LLDP Dot1 TLVs Settings
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
D-Link DMS-1100 Series User Manual L2 Features > LLDP > LLDP Dot1 TLVs Settings This LLDP Dot1 TLVs Settings page allows user to configure an individual port or group of ports to exclude one or more of the IEEE 802.1 organizational port VLAN ID TLV data types from outbound LLDP advertisements. Figure 4.107 - L2 Features > LLDP > LLDP Dot1 TLVs Settings The fields that can be configured for the LLDP Dot1 TLVs Settings are described below: Item Description From Port / To Port Select the range of ports to be configured. Port VLAN Select to enable or disable the port VLAN ID TLV to send. The Port VLAN ID TLV is an optional fixed length TLV that allows a VLAN bridge port to advertise the port's VLAN identifier (PVID) that will be associated with untagged or priority tagged frames. Protocol VLAN Select to enable or disable Port and Protocol VLAN ID (PPVID) TLV to send, and enter the VLAN ID in PPVID TLV. VLAN Name Select to enable or disable the VLAN name TLV to send, and enter the ID of the VLAN in the VLAN name TLV. Protocol Identity Select to enable or disable the Protocol Identity TLV to send, and the protocol name. Options for protocol name to choose from are None, EAPOL, LACP, GVRP, STP, and All. Table 4.76 Click Apply to make the configurations take effect. L2 Features > LLDP > LLDP Dot3 TLVs Settings The LLDP Dot3 TLVs Settings page allows user to configure an individual port or group of ports to exclude one or more IEEE 802.3 organizational specific TLV data type from outbound LLDP advertisements. 84