D-Link DMS-1100 User Manual - Page 79
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Groups Settings
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
D-Link DMS-1100 Series User Manual general query messages periodically. Robustness Value (1-7) Enter the robustness variable used in IGMP snooping. Last Member Query Interval Enter the interval at which the IGMP snooping querier sends IGMP (1-25) group-specific or group-source-specific query messages. Table 4.58 Click Apply to make the configurations take effect. L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Groups Settings The IGMP snooping Groups Settings page allows user to configure and view the IGMP snooping static group, and view IGMP snooping group. Figure 4.94 - L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Group Settings The fields that can be configured for edit IGMP Snooping Group Settings are described below: Item Description VID (1-4094) Enter the VLAN ID. Group Address Enter the IP multicast group address. From Port / To Port Select the range of ports to be configured. Table 4.59 Click Apply to make the configurations take effect. Click the Delete button to remove the specified entry. Click the Find button to locate a specific entry based on the information entered. Click the Find All button to view all the entries. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. The fields that can be configured for IGMP Snooping Groups Table are described below: Item Description VID (1-4094) Specify the VLAN ID. Group Address Enter the IP multicast group address. 73