D-Link DMS-1100 User Manual - Page 41
System > System Log > System Log Server Settings, System > System Log > System Log
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
D-Link DMS-1100 Series User Manual Click Apply to make the configurations take effect. System > System Log > System Log Server Settings The System Log Server Settings page allows user to view and configure the system log's server settings. Figure 4.38 - System > System Log > System Log Server Settings The fields that can be configured for System Log Server Settings are described below: Item Description IPv4 Address Select and enter the IPv4 address. UDP Port (514 or 1024-65535) Enter the system log server's UDP port number. This value must be 514 or between 1024 and 65535. The default value is 514. Severity Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Facility Select the facility value. The values must be between 0 and 23. Table 4.20 Click Apply to make the configurations take effect and click the Delete button to remove the entry. System > System Log > System Log The System Log page displays the system logs on the Switch. 35