D-Link DMS-1100 User Manual - Page 91
LLDP Dot3 TLVs Settings, From Port / To Port, MAC/PHY, Configuration/Status, Enabled, Disabled
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
D-Link DMS-1100 Series User Manual Figure 4.108 - L2 Features > LLDP > LLDP Dot3 TLVs Settings The fields that can be configured for the LLDP Dot3 TLVs Settings are described below: Item Description From Port / To Port A consecutive group of ports may be configured starting with the selected port. MAC/PHY Configuration/Status Select whether the MAC/PHY Configuration Status is enabled on the port. The possible field values are: ◆ Enabled: Enables the MAC/PHY Configuration Status on the port. ◆ Disabled: Disables the MAC/PHY Configuration Status on the port. Link Aggregation Specifies whether the link aggregation is enabled on the port. The possible field values are: ◆ Enabled: Enables the link aggregation configured on the port. ◆ Disabled: Disables the link aggregation configured on the port. Specifies whether the link aggregation is enabled on the port. The possible field values are: Maximum Frame Size ◆ Enabled: Enables the Maximum Frame Size configured on the port. ◆ Disabled: Disables the Maximum Frame Size configured on the port. Power via MDI Advertises the Power via MDI implementations supported by the port. The possible field values are: ◆ Enabled: Enables the Power via MDI configured on the port. ◆ Disabled: Disables the Power via MDI configured on the port. Table 4.77 Click Apply to make the configurations take effect. 85