D-Link DMS-1100 User Manual - Page 83
L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Groups Settings
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
D-Link DMS-1100 Series User Manual Figure 4.99 - L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Setting - Edit The fields that can be configured for MLD Snooping Settings are displayed below: Item Description Fast Leave Select to enable or disable the MLD snooping fast leave function. Querier State Select to enable or disable the querier state. Query Version Select the general query packet version sent by the MLD snooping querier. Query Interval (1-31744) Enter the interval at which the MLD snooping querier sends MLD general query messages periodically. Max. Response Time (1-25) Enter the maximum response time, in seconds, advertised in MLD snooping queries. The range is 1 to 25. Robustness Value (1-7) Enter the robustness variable used in MLD snooping. Last Member Query Interval Enter the interval at which the MLD snooping querier sends MLD (1-25) group-specific or group-source-specific (channel) query messages. Table 4.66 Click Apply to make the configurations take effect. L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Groups Settings The MLD Snooping Groups Settings page allows user to configure and view the MLD snooping static group, and view MLD snooping group. 77