D-Link DMS-1100 User Manual - Page 61
L2 Features > VLAN > Auto Surveillance VLAN > Auto Surveillance Properties
View all D-Link DMS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
D-Link DMS-1100 Series User Manual From Port / To Port Copy the configuration of VLAN interface for specified port ranges. Table 4.41 Click Apply to make the configurations take effect. Click the Back button to return to the previous page. L2 Features > VLAN > Auto Surveillance VLAN > Auto Surveillance Properties The Auto Surveillance Properties page is used to configure the auto surveillance VLAN global settings and display the ports surveillance VLAN information. Figure 4.67 - L2 Features > VLAN > Auto Surveillance VLAN > Auto Surveillance Properties The fields that can be configured for Auto Surveillance Properties are described below: Item Description Global Settings Surveillance VLAN Specify to enable or disable the surveillance VLAN state. Surveillance VLAN ID Enter the surveillance VLAN ID. The range is from 1 to 4094. Surveillance VLAN CoS Specify the priority of the surveillance VLAN from 0 to 7. Aging Time (1-65535) Specify the aging time of the surveillance VLAN. The range is from 1 to 65535 minutes. The default value is 720 minutes. The aging time is used to remove a port from surveillance VLAN if the port is an automatic surveillance VLAN member. When the last surveillance device stops sending traffic and the MAC address of this surveillance device is aged out, the surveillance VLAN aging timer will be started. The port will be removed from the surveillance VLAN after expiration of surveillance VLAN aging timer. If the surveillance traffic resumes during the aging time, the aging counter will be reset and the timer will stop. Surveillance VLAN Log Specify to enable or disable the Surveillance VLAN log feature. ONVIF Global Status Surveillance Device Unit counts for surveillance devices (determined by OUI) 55