Dell PowerEdge MX7000 EMC OpenManage Enterprise-Modular Edition Version 1.20.1 - Page 13
Table 2. MX7000-OME-Modular 1.20.10 and previous solution baselines continued
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Table 2. MX7000-OME-Modular 1.20.10 and previous solution baselines (continued) Component v1.10.20 v1.20.00 v1.20.10 Catalog exceptions Mellanox ConnectX-4 Lx Ethernet Adapter Firmware 14.25.80.00 14.26.60.00 14.27.61.22 Intel NIC Family Version 19.5.x Firmware for X710, XXV710, and XL710 adapters 19.5.12 19.5.12 19.5.12 Emulex Fibre Channel Adapter Firmware. 03.02.18 03.02.18 03.02.18 OpenManage Enterprise Modular 1.10.20 1.20.00 1.20.10 MX9116n Fabric 10.5.0.5* Switching Engine OS10 10.5.0.7 10.5.1.6 Manual DUP MX5108n Ethernet Switch OS10 10.5.0.5* 10.5.0.7 10.5.1.6 Manual DUP MX5016s Storage 2.40 Sled 2.40 2.40 MX5000s SAS IOM 1.0.9.6 1.0.9.8 1.0.9.8 MXG610s 8.1.0_lnx3 8.1.0_lnx3 No catalog update or DUP Delta PSU 68.5F 68.5F 68.5F Manual DUP Artesyn PSU 36.6C 36.6C 36.6C Manual DUP *Update to OS v10.5.0.7 and then to v10.5.1.6 Before updating MX7000, check the PSU version. If the PSU version is 00.36.6B, then update the PSU. For details, see https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=5tc17&oscode=naa&productcode=poweredgemx7000. Downgrading OME-Modular is not recommended. OME-Modular firmware downgrade to earlier versions does not support restoration of any configuration or settings. NOTE: Updating the MXG610s FC IOM is not supported from the OME-Modular user interface. Use the Brocade interface on the IOM. NOTE: Updating MX9116n or MX5108n using catalog method is currently not supported. The catalog compliance is reported as "Unknown". NOTE: As these update instructions include updates to various components of the solution, there is a possibility of traffic impact to existing workloads. It is recommended that the updates are applied only during a regular single maintenance window. NOTE: Powercycle (cold boot) of the MX7000 chassis after updating all applicable solution components may be necessary as a last troubleshooting step. For details, see Controlling chassis power. Updating firmware for PowerEdge MX solution 13