Dell PowerEdge T350 EMC Installation and Service Manual - Page 13
Table 3. Rear view of the system continued, Ports, panels, or slots, Description
![]() |
View all Dell PowerEdge T350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Table 3. Rear view of the system (continued) Item Ports, panels, or slots Icon Description 5 System identification button Press the system ID button: ● To locate a particular system within a rack. ● To turn the system ID on or off. To reset iDRAC, press and hold the button for 16 seconds. NOTE: ● To reset iDRAC using system ID, ensure that the system ID button is enabled in the iDRAC setup. ● If the system stops responding during POST, press and hold the system ID button (for more than five seconds) to enter the BIOS progress mode. 6 NIC port (1) 7 USB 3.0 port (1) 8 USB 2.0 port (1) 9 NIC port (2) 10 iDRAC ethernet port 11 VGA port 12 Serial port The NIC ports are embedded on the LOM card that is connected to the system board. The USB ports are 9-pin, 3.0-compliant. These ports enable you to connect USB devices to the system. The USB ports are 4-pin, 2.0-compliant. These ports enable you to connect USB devices to the system. The NIC ports are embedded on the LOM card that is connected to the system board. Enables you to remotely access iDRAC. For more information, see the Integrated Dell Remote Access Controller User's Guide at www.dell.com/ poweredgemanuals. Enables you to connect a display device to the system. For more information about the VGA port, see the Dell EMC PowerEdge T350 Technical Specifications on product documentation page. Enables you to connect a serial device to the system. For more information about the Serial port, see the Dell EMC PowerEdge T350 Technical Specifications on product documentation page. PowerEdge T350 system overview 13
![](/manual_guide/products/dell-poweredge-t350-emc-installation-service-manual-63498c5/13.png)