Dell PowerEdge T350 EMC Installation and Service Manual - Page 37
Installing the intrusion switch module
![]() |
View all Dell PowerEdge T350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Figure 20. Removing the intrusion switch module Next steps Replace the intrusion switch module. Installing the intrusion switch module Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps 1. Align and slide the intrusion switch module into the system slot until firmly seated. 2. Connect the intrusion switch cable to the connector on the system board. Figure 21. Installing the intrusion switch module Installing and removing system components 37
![](/manual_guide/products/dell-poweredge-t350-emc-installation-service-manual-63498c5/37.png)
Figure 20. Removing the intrusion switch module
Next steps
Replace the intrusion switch module
.
Installing the intrusion switch module
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
Steps
1.
Align and slide the intrusion switch module into the system slot until firmly seated.
2.
Connect the intrusion switch cable to the connector on the system board.
Figure 21. Installing the intrusion switch module
Installing and removing system components
37