Dell PowerEdge T350 EMC Installation and Service Manual - Page 72
Installing the BOSS S2 module blank, Removing the BOSS S2 module blank
View all Dell PowerEdge T350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Figure 59. Removing the BOSS S2 module blank Next steps 1. Replace the BOSS S2 module blank or install BOSS S2 card module. Installing the BOSS S2 module blank Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the front bezel. Steps 1. Align and slide the BOSS S2 module blank into the system bay. 2. Hold the BOSS S2 module blank into its place and tighten the captive screw. 72 Installing and removing system components
Figure 59. Removing the BOSS S2 module blank
Next steps
1.
Replace the BOSS S2 module blank
or
install BOSS S2 card module
.
Installing the BOSS S2 module blank
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
Remove the front bezel
.
Steps
1.
Align and slide the BOSS S2 module blank into the system bay.
2.
Hold the BOSS S2 module blank into its place and tighten the captive screw.
72
Installing and removing system components