Dell PowerEdge T350 EMC Installation and Service Manual - Page 15
Table 4. Rear view of the system continued
View all Dell PowerEdge T350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Table 4. Rear view of the system (continued) Item Ports, panels, or slots Icon Description ● If the system stops responding during POST, press and hold the system ID button (for more than five seconds) to enter the BIOS progress mode. 5 NIC port (1) 6 USB 3.0 port (1) 7 USB 2.0 port (1) 8 NIC port (2) 9 iDRAC ethernet port 10 VGA port 11 Serial port The NIC ports are embedded on the LOM card that is connected to the system board. The USB ports are 9-pin, 3.0-compliant. These ports enable you to connect USB devices to the system. The USB ports are 4-pin, 2.0-compliant. These ports enable you to connect USB devices to the system. The NIC ports are embedded on the LOM card that is connected to the system board. Enables you to remotely access iDRAC. For more information, see the Integrated Dell Remote Access Controller User's Guide at www.dell.com/ poweredgemanuals. Enables you to connect a display device to the system. For more information about the VGA port, see the Dell EMC PowerEdge T350 Technical Specifications on product documentation page. Enables you to connect a serial device to the system. For more information about the Serial port, see the Dell EMC PowerEdge T350 Technical Specifications on product documentation page. PowerEdge T350 system overview 15