Dell PowerEdge T350 EMC Installation and Service Manual - Page 46
Installing a 2.5-inch drive into the 3.5-inch drive adapter
![]() |
View all Dell PowerEdge T350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Figure 30. Removing a 2.5-inch drive from the 3.5-inch drive adapter Next steps Replace a 2.5-inch drive into the 3.5-inch drive adapter. Installing a 2.5-inch drive into the 3.5-inch drive adapter Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Remove the drive carrier. 3. Remove 3.5-inch drive adapter from the 3.5-inch drive carrier. Steps 1. Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter. 2. Using a Phillips 1 screwdriver, tighten the screws to secure the drive to the 3.5-inch drive adapter. NOTE: If the 2.5-inch drive has Torx screw, use Torx 6 screwdriver to install the drive to a 3.5-inch drive adapter. 46 Installing and removing system components
![](/manual_guide/products/dell-poweredge-t350-emc-installation-service-manual-63498c5/46.png)
Figure 30. Removing a 2.5-inch drive from the 3.5-inch drive adapter
Next steps
Replace a 2.5-inch drive into the 3.5-inch drive adapter
.
Installing a 2.5-inch drive into the 3.5-inch drive adapter
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Remove the drive carrier
.
3.
Remove 3.5-inch drive adapter from the 3.5-inch drive carrier
.
Steps
1.
Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2.
Using a Phillips 1 screwdriver, tighten the screws to secure the drive to the 3.5-inch drive adapter.
NOTE:
If the 2.5-inch drive has Torx screw, use Torx 6 screwdriver to install the drive to a 3.5-inch drive adapter.
46
Installing and removing system components