Dell PowerEdge T350 EMC Installation and Service Manual - Page 71

Optional BOSS S2 module, Removing the BOSS S2 module blank

Get Dell PowerEdge T350 PDF manuals and user guides View all Dell PowerEdge T350 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Figure 58. Installing an expansion card 5. Tilt the metal bracket and tighten the captive screw. Next steps 1. If required, reconnect the cables to the expansion card. 2. Install the air shroud. 3. Follow the procedure listed in After working inside your system. Optional BOSS S2 module Removing the BOSS S2 module blank Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the front bezel. Steps Loosen the captive screw and pull out the BOSS S2 module blank from the system bay. Installing and removing system components 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
Figure 58. Installing an expansion card
5.
Tilt the metal bracket and tighten the captive screw.
Next steps
1.
If required, reconnect the cables to the expansion card.
2.
Install the air shroud
.
3.
Follow the procedure listed in
After working inside your system
.
Optional BOSS S2 module
Removing the BOSS S2 module blank
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
Remove the front bezel
.
Steps
Loosen the captive screw and pull out the BOSS S2 module blank from the system bay.
Installing and removing system components
71