Dell PowerEdge T350 EMC Installation and Service Manual - Page 43
Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
View all Dell PowerEdge T350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Figure 27. Installing a drive into the drive carrier Next steps 1. Install the drive carrier. 2. Install the front bezel. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Remove the drive carrier. Steps 1. Remove the screws from the rails on the drive carrier. NOTE: If the 3.5-inch drive has Torx screw, use Torx 6 screwdriver to remove the drive from a 3.5-inch drive adapter. 2. Lift the 3.5-inch drive adapter out of the drive carrier. Installing and removing system components 43
Figure 27. Installing a drive into the drive carrier
Next steps
1.
Install the drive carrier
.
2.
Install the front bezel
.
Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Remove the drive carrier
.
Steps
1.
Remove the screws from the rails on the drive carrier.
NOTE:
If the 3.5-inch drive has Torx screw, use Torx 6 screwdriver to remove the drive from a 3.5-inch drive adapter.
2.
Lift the 3.5-inch drive adapter out of the drive carrier.
Installing and removing system components
43