Dell PowerEdge T350 EMC Installation and Service Manual - Page 89
Installing a power supply unit blank, Removing a power supply unit
View all Dell PowerEdge T350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Figure 77. Removing a power supply unit blank Next steps Replace the PSU blank or install the PSU. Installing a power supply unit blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. NOTE: Install the power supply unit (PSU) blank only in the second PSU bay. 2. Remove the PSU. Steps Align the PSU blank with the PSU bay and push it into the PSU bay until it clicks into place. Figure 78. Installing a power supply unit blank Removing a power supply unit Prerequisites CAUTION: The system requires one power supply unit (PSU) for normal operation. On power-redundant systems, remove and replace only one PSU at a time in a system that is powered on. 1. Follow the safety guidelines listed in the Safety instructions. 2. Disconnect the power cable from the power outlet and from the PSU you intend to remove. 3. Remove the cable from the strap on the PSU handle. Installing and removing system components 89