Dell S2815dn tm Smart Multifunction Printer User Guide - Page 146

Forwarding E-mail Address 2 Allows you to enter the e-mail address to which incoming faxes are to be forwarded. Forwarding E-mail Address 3 Allows you to enter the e-mail address to which incoming faxes are to be forwarded. Forwarding E-mail Address 4 Allows you to enter the e-mail address to which incoming faxes are to be forwarded. Forwarding E-mail Address 5 Allows you to enter the e-mail address to which incoming faxes are to be forwarded. Server Type Sets the server type. Server Address Sets the server address registered under the server ID. Server Port Number Sets the server port number. Login Name Sets the login name. Login Password Sets the login password. Re-enter Password Enter the password again to confirm it. Share Name Sets the shared name. Server Path Sets the server path. Redial Attempts Sets the number of redial attempts (0-13) to make if the destination fax number is busy. If you enter 0, the printer will not redial. Interval of Redial Sets the interval (1-15 minutes) between redial attempts. Resend Delay Sets the interval (3-255 seconds) between re-send attempts. Tone/Pulse Sets whether to use tone or pulse dialing. Prefix Dial Sets whether to set a prefix dial number. Prefix Dial Number Sets a prefix dial number of up to five digits. This number dials before any auto dial number is started. It is useful for accessing the Private Automatic Branch Exchange (PABX). Fax Cover Page Fax Header*1 Sets whether to attach a cover page to faxes. Sets whether to print the information of the sender on the header of faxes. ECM Sets whether to enable the Error Correction Mode (ECM). To use the ECM, the remote machines must also support the ECM. Modem Speed Allows you to adjust the fax modem speed when a fax transmission or reception error occurs. Display Manual Fax Recipients Sets whether to show the fax number of the recipient on the Sending Fax screen when manually sending a fax. Fax Activity Sets whether to automatically print a fax activity report after every 50 incoming and outgoing fax communications. Fax Transmit Sets whether to print a transmission report after every fax transmission or only when an error occurs. Fax Broadcast Sets whether to print a transmission report after every fax transmission to multiple destinations or only when an error occurs. Fax Protocol Sets whether to print the protocol monitor report after every fax transmission or only when an error occurs. *1 This item is not available when Country is set to United States. 146 Dell™ Printer Configuration Web Tool