Dell S2815dn tm Smart Multifunction Printer User Guide - Page 210

Power Saver Timer Purpose: To specify the time for transition to power saver mode. Values: Sleep Deep Sleep 7 minutes* Available Range: 1-60 minutes 8 minutes* Available Range: 1-60 minutes Specifies the time taken by the printer to enter Sleep mode after it finishes a job. Specifies the time taken by the printer to enter Deep Sleep mode after it has entered Sleep mode. When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a medium value if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer or remote fax machine. You can also change the status of the printer to the standby mode by pressing the (Power Saver) button on the operator panel. Date & Time Purpose: To specify the date and time formats. Values: Time Zone Date Time Format Format 12 Hour 24 Hour Sets the time zone. Sets the date depending on the Format settings. Sets the date format. Sets the time. Sets the time in 12-hour format. Sets the time in 24-hour format. mm / inch Purpose: To specify the default measurement unit displayed after the numeric value on the operator panel. Values: Millimeters(mm)* Inches(") Selects millimeter as the default measurement unit. Selects inch as the default measurement unit. NOTE: The default for mm/inch varies depending on other settings, such as Country and Document Size. 210 Understanding the Printer Menus