Dell S2815dn tm Smart Multifunction Printer User Guide - Page 351

Option Transmission Defaults Fax Reports Discard Size Auto Redial Setup Redial Attempts Tone/Pulse Interval of Redial Resend Delay Prefix Dial Fax Cover Page Fax Header ECM Modem Speed Display Manual Fax Recipients Fax Activity Fax Transmit Fax Broadcast Description When receiving a document as long as or longer than the paper installed in your printer, you can set the printer to discard any excess at the bottom of the page. If the received page is outside the margin you set, it will print on two sheets of paper at the actual size. When the document is within the margin and Discard Size is set to Auto Reduction, the printer reduces the document to fit it onto the appropriate sized paper and discard does not occur. If Discard Size is set to other than Auto Reduction, the data within the margin will be discarded. You can specify the number of redial attempts to make when the destination fax number is busy, within the range of 0 to 13. If you enter 0, the printer will not redial. Your printer can automatically redial a remote fax machine if it was busy. Intervals from 1-15 minutes can be entered. You can specify the interval between transmission attempts within the range of 3 to 255 seconds. The default is 8 seconds. You can select the dialing type. • Tone • Pulse(10PPS) • Pulse(20PPS) You can specify whether or not to set a prefix dial number. When you set Prefix Dial to On, the number set in Prefix Dial Number dials before any auto dial number is started. It is useful for accessing the Private Automatic Branch Exchange (PBX). You can set a prefix dial number of up to five digits. You can set whether to attach a cover page to faxes when sending faxes. Prints the sender's information on the header of faxes. Tap Off to turn this feature off. Tap On to turn this feature on. Note that if United States is selected for the setting of Country, this option does not appear on the menu. The setting is fixed to On and cannot be changed. For information on the country setting, see "Setting Your Country." You can set whether to enable or disable the ECM (Error Correction Mode). You can set the modem speed. You can set whether to display the fax number of the recipient on the Sending Fax screen when manually sending a fax. You can set whether to automatically print a fax activity report after every 50 incoming and outgoing fax communications. You can set whether to print a transmission result after a fax transmission. You can set whether to print a transmission result after a fax transmission to multiple locations. Faxing 351